Product Categories: Data and Controls

Fusion4 MSC-L is the world’s most advanced multi stream controller for loading operations. Custody-transfer approved loading for up to 24 meter streams simultaneously and other advanced features mean fewer, more powerful devices for road loading, rail, marine and tank farm operations.​​​​​​​​

EasySet Digital Temperature Controllers The EDC201, EDC202 and EDC203 industrial controllers provide precise temperature control of single input and single control output temperature chambers, furnaces, ovens, dryers and packaging machines. The controllers are available in standard 1/16 DIN, 1/8 DIN and 1/4 DIN panel size formats. Vivid and large 4-digit displays and keypad buttons enable…

Universal Digital Controllers Easy to Install, configure, and operate.  Built on a legacy of performance and reliability, our UDC2500, EDC3200 and UDC3500 controllers deliver even more power, more flexibility and higher performance. Features Infrared PC and Pocket PC Configuration NEMA 4X, IP65 Front Face Protection Accutune III Ethernet and Modbus Communications Typical Applications • Metals,…

The ControlEdge RTU is designed to withstand harsh environments and for easy deployment at remote sites. It also allows remote maintenance, thereby reducing the need to travel to the field. This solution offers a unique combination of capabilities: Operates in harsh environments with low power consumption – ideal for remote installation and operation on solar power Increased availability through native…

    C1D1 Intrinsically Safe Wireless Flow Totalizer Battery operated flow totalizer with wireless output.  Ideal for new application where there is no power available. Features Local display with flow rate totalizer and diagnostics Battery-powered electronically optimized for long life (5 years+) Integrates with industry-standard turbine and positive displacement meters Hazardous location classified for CID1…

The CPMS Cathodic Protection Monitoring System monitors above and below ground impressed current cathodic protection systems to ensure that proper corrosion protection is in place and operating at the right levels. Standard 4 or 8 cathodic protection monitoring channels Standard with 4 discrete input channels Modular expansion I/O available Simultaneous dual MODBUS RTU and Ethernet…

Designed specifically for demanding industrial applications, the NET Concentrator System® (NCS) provides a real-time signal gateway between the field or factory floor and your control strategy.) Modular mixed analog and digital I/O Just four or thousands of I/O points per network Peer-to-host and peer-to-peer networks Simultaneous Ethernet and dual MODBUS RTU communications Acts as a…

Part of the Moore Industries FS FUNCTIONAL SAFETY SERIES, the exida® SIL 2 and SIL 3 certified STA Safety Trip Alarm performs as a logic solver and acts on potentially hazardous process conditions; warns of unwanted process conditions; provides emergency shutdown; or provides on/off control in Safety Instrumented Systems (SIS) and traditional alarm trip applications…

Part of Moore Industries’ FS Functional Safety Series, the exida® approved, SIL 3 capable 2-wire (loop powered) SSX and 4-wire (line/mains powered) SST Safety Isolators and Splitters provide isolation and signal conversion for your SIS (Safety Instrumented System) needs. These units protect and enhance loops and also pass valuable HART® data from the field transmitter…

The SFY Functional Safety SIL 3 capable Frequency-to-DC Transmitter with Display is part of Moore Industries’ FS Functional Safety Series. It monitors frequency, period, high or low pulse width, and contact closure signals and converts the input signal to a proportional, input-to-output isolated 4-20mA output ready for direct interface with a Safety System, readout instrument,…